Miter clamping...

Gross Stabil Multi-angle Clamp

Quick clamping system with
adjusting lever up to 4",
clamping force up to 350 lbs.
About $100!!


Other Gross Stabil mitre products for clamping large beams, rafters, profiles, facing etc. Mastering sharp angles, semicircular arches, double corner joints and, of course, miters for up to 4" stock.




Use a bar clamp for miters... Mcx Mitre Clamping System easily clamps 22-1/2, 45's and 90 degree angles. Pressure up to 750 lbs. Uses interchangeable angle adapters. Use with biscuits or dowel rods. Clamping up to 4 inches. The power of the clamp is that it holds both pieces in place firmly and also squeezes that joint together rather than merely holding them together as typical angle clamps do.
Not costly. Not cheap.


Pinch Dogs - Old World Tools That Will Never Outlive Their Usefulness, 1-1 / 2 Steel Pinch Dogs About $4.00 each.



Adjustable Jaw Miter Clamp Kit Can be bench mounted. Has its uses with up to 5" stock. About $40.





Picture Framer's Miter Vise clamps stock up to 4" wide at 90° for sawing or joining.

Large (1-1/2" diameter) knurled knobs offer ample leverage; vise swivels 360° and tilts 90°.

A reasonable $50.




Large hog clamps are spring steel with pointed ends.

The Maestro CLAMP-ALL Woodworking Set works well with smaller items or thin materials when precise, pinpoint clamping pressure is needed.

Pointed tips grip tough surfaces such as laminate - enclosed suction cups with Teflon swivel tips gently handle more delicate surfaces. Set includes M103 expander tool with comfortable rubber hand grips, four M200 medium wood clamps and four MTC-1 suction cups with Teflon® swivel tips - extra clamps and suction cups available. Another good set is made by Europe's Ulmia.



Jet Super-fast Jointer Clamps: No need to tighten, turn or twist! JET Super-Fast jointer clamps hold work in perfect alignment:

Simply push the clamps into position and you can glue, screw, pin or hold a workpiece together.

Right angle, tee and butt joints are automatically aligned, freeing your hands.

Hold different thicknesses up to 3/4".